For installation in channel letters, raceway and remote applications


  • Exclusive design saves up to 30% on neon-to-LED retrofits
  • Series wired just like neon with bypass that prevents full string outage
  • Constant current driver eliminates all resistors found on all other LED modules
  • Consistently bright modules no matter the distance from the driver
  • Highly efficient, cool-running design extends LED useful life
  • Remote mounts up to 300 feet with 18AWG wire
  • Safe, low-current design with GFI, open and short circuit, overload and polarity protection
  • Long driving distances require fewer LED drivers
  • Single-wire design reduces installation time
  • UL Sign Components Manual (SAM) listed
  • UL Classified for rapid retrofit neon-to-LED conversion

5-Year Warranty



Input Voltage (50/60Hz) 120VAC (+/-10%)
Input Current @ Max. Load 0.5A rms
Power Factor 0.95
Output Voltage 0-400VDC (+/-200VDC max. to Gnd)
Output Current (Line Load Regulated) 120mA (Factory Set)
Output Power 50W max.
Operating Temperature* -30°F to 122°F / -34°C to 50°C
Input Surge Protection Varistor Type
Built-In Protection GFI, Open and Short Circuit, Overload, Reverse Polarity

*When operating at ambient temperature higher than above limit, reduce load by 10% for each 9°F (5°C) ambient rise



Length (A) 4.85 in 12.3 cm
Width (B) 2.0 in 5.0 cm
Height (C) 1.58 in 4.0 cm
Mounting (D) 4.50 in 11.4 cm
Mounting (E) 1.38 in 3.5 cm
Weight 15.0 oz 425 g
Primary Leads 18.0 in 45.7 cm
Output Leads 18.0 in 45.7 cm